How to Get a Plumber to Fix Your Washing Machine
Getting a plumber to fix your washing machine can be a hassle. It’s important that you find one who’s trained and experienced. They will be able to tell you exactly what’s wrong, and what you can do to fix it.
Installing a standpipe
Using a standpipe is a good way to ensure your washing machine is drained properly. It also prevents sewer gas from entering your home.
A standpipe is a vertical pipe that connects your washing machine to a drain. It is typically made of PVC, metal, or concrete. They are also available in various sizes. The diameter of your standpipe should be at least 2 inches. This is the minimum required to prevent water from backflowing.
To install your standpipe, start by removing the hose from your washing machine. Make sure the end of the hose is pointed downward. Then, use a reciprocating saw to cut the drain pipe. The drain pipe should be cut at a height of about six inches from the top of the machine.
You can now insert a rubber drain hose into the standpipe. This hose should be about five inches long. Secure the hose using zip ties.
Next, you must install the P-trap. you can visit the Candu Plumbing of Chatsworth website to learn more -trap connects the standpipe to your drain. It is designed to be two inches in diameter. It should also have a clean-out plug.
Connecting hot and cold water
Generally, a washing machine will have two hot and cold connections. These connections are located at the back of the machine. The inlet valves are marked “hot” and “cold”. They are controlled by solenoids. These solenoids are activated when a current is sensed. They send electric power to open and close the flow of hot and cold water.
These solenoids are often located ahead of the connection to the hoses carrying hot and cold water to the washing machine. These hoses are typically flexible hoses.
Some washing machines have a hot and cold fill valve. This valve can fill the machine with cold water but can also drain water out of the machine. If the hot and cold fill valve is not used, the washing machine may not work.
One of the simplest configurations is to connect the washing machine to a single cold feed line. This reduces the number of parts and minimizes the cost of construction. This configuration is also more energy efficient.
Installing a drain hose
Depending on the brand of washing machine you have, you might need to install a drain hose. A plumber can help you with the job. However, you will only need a few tools to get the job done. Luckily, these tools will make your job easier.
First, you will need to locate a drain pipe. It should be at least 86 cm long. You will also need a hose clamp. The clamps should be placed about 15 cm down the drain pipe.
You will also need a bucket. This will catch any water that might overflow. A durable zip tie can also be used to hold the drain hose in place.
After you’ve figured out your drain pipe and bucket, you’ll need to find a place to install the hose. Ideally, you’ll want to place the hose in a spot that’s about 45 inches away from the washing machine. This will keep the hose from running into the machine, and will also help to prevent any overflow.
Troubleshooting
Whenever a washing machine malfunctions, it is not always easy to figure out why. Fortunately, there are a few common issues that you can fix yourself. However, if the problem persists, you may need to call a technician.
One of the most common problems is a washer that will not spin. This can be caused by a faulty motor or a broken belt. You may also have problems with your drainage hose.
Washing machines are exposed to great volumes of water. Consequently, they may take a beating. If this is the case, you may have to unplug the machine to diagnose the problem. You can also check the machine’s circuit breaker. If the breaker is in the OFF position, turn it back to the ON position.
Another common problem is a faulty water-level switch. This switch is located underneath the lid of the machine. If it fails, the water level will not be able to detect the correct level of water in the tub. This could result in overflowing.
Candu Plumbing of Chatsworth
9726 Variel Ave, Chatsworth, CA 91311
(818) 492-3067
https://www.sharkplumbers.com/plumbers-in-chatsworth/